DropShip List,
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.
Inspect equipment before each workout. Check that all nuts, bolts, screws and pop pins
are in place and fully tightened. Also, before use, check cables for sign of wear. Replace all
worn parts immediately. Never use machine if any parts are damaged or missing.
FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.
Keep clear of the cables and all moving parts when machine is in use.
Always make sure all Snap Links are closed when doing cable/pulley/strap exercises.
Exercise with care. Perform your exercises at a smooth moderate pace; never perform jerky
or uncoordinated movements that may cause injury.
It is recommended that you workout with a training partner.
Do not allow children or minors to play on or around this equipment.
If unsure of proper use of equipment, call your local Body-Solid distributor or the
Body-Solid customer service center at 1-800-556-3113.
WARNING: Consult your physician before starting your exercise program. For your own
safety, do not begin any exercise program without proper instruction.
of Cables
IMPORTANT:Cables are
wear items.It is your
responsibility to prevent
unexpected breakage.
Cable inspection should
be performed daily.
Inspect all cables, the
nylon coating on all
cables,and the area
near the fitting at each
end of each cable.
Replaceanydamaged or
worncableimmediately.
Do not allow the machine
to be used until damaged
or worn cables are
replaced.Using or allowing
a machine to be used
with a suspect cable can
result in serious injury.See
Owner’s Manual for more
information.
2
3
When using exercise equipment, The PFID125x is designed for your enjoyment. By
you should always take basic following these precautions and using common sense,
precautions including the you will have many safe and pleasurable hours of
following: healthful exercise with your Powerline Multi Bench.
• Read all instructions before using the PFID125x. After assembly, you should check all functions to
These instructions are written to ensure your safety ensure correct operation. If you experience problems,
and to protect the unit. fi rst recheck the assembly instructions to locate any
possible errors made during assembly. If you are
unable to correct the problem, call the dealer from
• Do not allow children on or near the equipment. whom you purchased the machine or call
• Use the equipment only for its intended purpose 1-800-556-3113 for the dealer nearest you.
as described in this guide. Do not use accessory
attachments that are not recommended by the Obtaining Service
manufacturer. Such attachments might cause serious
injuries. Please use this Owner’s Manual to make sure that
• Wear proper excercise clothing and shoes for your all parts have been included in your shipment. When
workout, no loose clothing. ordering parts, you must use the part number and
• Keep hands, limbs, loose clothing, and long hair well description from this Owner’s Manual. Use only
out of the way of all moving parts Powerline by Body Solid replacement parts when
• Use care when getting on or off the unit. servicing this machine. Failure to do so will void your
• Do no overexert yourself or work to exhaustion. warranty and could result in personal injury.
• If you feel any pain or abnormal symptoms, stop your
workout immediately and consult your physician. For information about product operation or
• Never operate unit when it has been dropped or service, check out the offi cial Powerline website
damaged. Return the equipment to a service center at www.bodysolid.com or contact an authorized
for examination and repair. Powerline dealer or a Powerline factory-authorized
• Never drop or insert objects into any opening in the service company or contact Body-Solid customer
equipment. service at one of the following:
• Always check the unit and its cables before each use.
Make sure that all fasteners and cables are secure Toll Free: 1-800-556-3113
and in good working condition. Phone: 1-708-427-3555
• Do not use the equipment outdoors or near water. Fax: 1-708-427-3556
• Email: [email protected]
Or write to: Body-Solid, Inc.
• Before beginning assembly, please take the time to Service Department
read the instructions thoroughly. 1900 S. Des Plaines Ave.
• Read each step in the assembly instructions and Forest Park, IL 60130 USA
follow the steps in sequence. Do not skip ahead. If
you skip ahead, you may learn later that you have Retain this Owner’s Manual for
to disassemble components and that you may have furture reference. Part numbers
damaged the equipment are required when ordering parts.
• Assemble and operate the PFID125x on a solid, level
surface. Locate the unit a few feet from the walls or
furniture to provide easy access.
4
The basic tools that you must obtain before assembling Read all “Notes” on each page before beginning each step.
the PFID125x include but are not limit to:
While you may be able to assemble the PFID125x using the
• Standard Wrench Set illustrations only, important safety notes and other tips may be
included in the text.
Some pieces may have extra holes that you will not use. Use
• Adjustable Wrench only those holes indicated in the instructions and illustrations.
• Standard / Metric Allen Key Set With so many assembled parts, proper
alignment and adjustment is critical. While
Installation Requirements tightening the nuts and bolts, be sure to leave
room for adjustments.
Follow these installation requirements when assembling
the PFID125x: The bottles that are marked “Poison” is your
touch up paint. Keep away from children.
Set up the PFID125x on a solid, fl at surface. A smooth,
fl at surface under the machine helps keep it level. : Obtain assistance! If you feel like you can’t
assemble the PFID125x by yourself then do
Provide ample space around the machine. Open space not attempt to do so as this could result in
around the machine allows for easier access. injury. Review the Installation Requirements
before proceeding with the following steps.
For aesthetic purposes, insert all bolts in the same
direction unless specifi ed (in text or illustrations) to do
otherwise.
Leave room for adjustments. Tighten fasteners such as
bolts, nuts, and screws so the unit is stable, but leave
room for adjustments. Do not fully tighten fasteners until
instructed in the assembly steps to do so.
Fill out and mail the warranty card.
If you need to order replacement parts please be
prepared to provide the following information
when contacting us so that we can assist you better.
5
6
7
HARDWARE ILLUSTRATION CONT.
8
Part 1 Part 2 Part 3
folding leg main frame back pad adjuster
[1pcs] [1pcs] [1pcs]
Part 4 Part 5 Part 6
back pad frame back pad seat pad
[1pcs] [1pcs] [1pcs]
Part 15 Part 16 Part 17
t-shaped pop pin round foot cap round foot cap
[2pcs] [2pcs] with wheels
[2pcs]
Part 18 Part 19
rubber tubing bushing
[2pcs] [4pcs]
9
10
11
please write your serial number in the boxes below
Body-Solid b
1900 S. Des Plaines Ave.
Hours: M-F 8:30 - 5:00
www.bodysolid.com
c Copyright 2009. Body-Solid. All rights reserved. Body-Solid reserves the right to change design and specifi cations when we feel it will improve the product.
Body-Solid machines maintain several patented and patent pending features and designs. All rights reserved on all design patents and utility patents.
12
