user's manual
lower decorative cover of the support arm(interior)
lower decorative cover of the support arm(exterior)
Installation of Front/Rear cover of main chain cover
Locate the shroud front and rear trim covers(5)and(15)respectively
As shown in Figure(4):Install the rear cover(15)first align the rear cov-
er(15)with the position on the left and right cover clamp bars of the chassis
assembly(1),press down to flatten and push forward to tighten the clamp.
Then install the front cover of main chain cover (5),align the front cover of
the guard (5)with the position of the left and right cover clamp bars of the
chassis assembly (1),press down and push the clamp forward until the left
and right guard and the back cover of the guard are flat.
5
5
5-1
6
6
7
7
7-1
