2. Technical standard
3. Machine diagram
4. Installation process
5. Operation guide
6. Machine debugging process
7. Packing list
8. Explosive view&parts list
Readall precautions andinstructions in this manualbeforeusing thisequipment.
1. This Curve treadmill is suitable for commercial fitness clubs, clubhouse fitness,
bodybuildingtraining,sports training,physicaleducation andso on.
2. This Curve treadmill is suitable for indoor use. Do not use it outdoors or in high
humidity. Do not allow water or other liquid to splash on the treadmill. Do not
allowedput orinsert anyabnormal thingsonthetreadmill.
3. Use the unpowered treadmill should ensure its 4 feet on the ground, and placed a
smooth, reliable, and the treadmill should retain the fuselage behind the safety of the
2000mm*1000mm space.
4. When using the device, please wear appropriate sportswear and sports shoes. The
first time you use this device, should have professional guidance. In the event of an
emergency,youneed to stop themachineimmediately.
5. Don't allowtwo ormore thantwo peopleat thesametime usethetreadmill do
exercise,this machinemaxusers weightis 170kg.
6. The heart rate sensor does not belong to medical equipment, there are many
reasons can cause inaccurate detection, test results are for reference only.(Hold the
heart of the handrail with both hands, several seconds later will have a more ready to
relativelyaccurate heart rate).
7.Theaction guidance:
A.Aerobic exercise : energyconsumption,improvecardiopulmonary skills,
acceleratethe bloodcirculation,enhance physicalfitness, getweightloss.
B.Whenused forthefirsttime,exerciser needs toholding thehandrail, tokeep the
balanceofthebody.
C.Peoplecanonly walk downthetreadmill afterconfirmingthe safety.
8.Anypartof treadmill cannot bein loose status.
9.Nevertouchany partsofrunning treadmillwith your finger.
10.Peoplewith longhair should payattention to thesafetyof hair whenusing.
11.When youfeeluncomfortable andunusual,please stop atonce andconsult tothe
doctor.
12..Every timebefore youstartto usethetreadmill,please checkit to makesureevery
boltand screwbelocked tightly.If anyofthem is loose,please changeorfixed.
13.Theremustbe themark of“Stop” inmaintenance.
14.If there is abnormalnoise orotherabnormal situationof thetreadmill, please
stop runningimmediately and contactour after-sales department atonce,or seek
professional help.
15.Thismachine is coincident tothe typeofCSin EN957-6.
Inputsupplyvoltage: four-celldrybattery
Time: 0:00—99.59
Calories: 0—999(kcal)
Heart rate: 60—300(Times/Min)
Revolvingspeed 0-900(r/min)
3.Machine diagram
4. Assembly instructions
Takingeasy-assemblyas theprinciple:
User Manual of this section is designed to ensure that the treadmills can be
assembled correctly. According to the user manual assembly procedure, the assembly
workwill bevery smooth.
●As a result of the large size of the treadmill, please select the location where the
treadmill willbe placed andensure there is enoughspace aroundit.
● Place all parts of the treadmill in the empty area and remove all packing materials.
Donot discard thepackingmaterials untiltheassembly workis completed.
● All bolts must be tightened during the assembly process unless otherwise stated,
andall bolts mustbetightened whentheassemblywork is completed.
● When assembling the treadmill, please make sure all parts are assembled according
tothe assemblydrawing.
Assembly step one:
Connectthemagnetic induction line andassemblethecolumn
Assembly instructions:
1)Removetheleft andright column packing materials
2) Fix the column to the corresponding position of the main frame as shown in the
figure.
Note:Connectthemagnetic line below
Magnetic wire
docking(only one
wire, the only
connection)
Assembly step two:
Connectthemagnetic induction line andassemblethehead holder:
Assembly instructions:
1) Connect the magnetic induction line of the head holder to the magnetic line of the
column
2) Fix the case to the corresponding position of the column, and fasten the head fixing
bracketwith thecolumn connectingbolt, as shownin thefigure.
Magnetic wire
docking ( only one
wire , the only
connection)
Assembly step three:
Assemblingthe head;connecting themagnetic line
1) Connecting the magnetic induction line of the meter head and the magnetic
inductionline of thehead holder
2) After connecting the magnetic induction line, place the meter head at the joint with
thehead holderandfasten it (as shown);
3) Stepping on the treadmill running belt with both feet, running the belt, press the
function button area button to start the treadmill, observe whether the machine is
runningnormally,andwhetherthemeter data display iscomprehensiveand accurate;
4) The machine runs normally, all bolts are tightened in place, and the treadmill is
assembled;
Magnetic wire
docking (only one
wire,the only
connection)
This treadmill adopts console model, four pieces dry battery power supply, low
power consumption,noexternal power supply required;
This treadmill interface has only one main interface, with six buttons to achieve the
purposeof use,thespecific operation methodsof thetreadmill are as follows:
1.Homepage
Themain interface is usedtodisplay devicename, time, distance, calories,speed,
2.Sixbutton
(1) Start/Stop button. In standby mode, all Numbers will start counting
only when you click the button.Click this key while running, and all data will
stop counting.
(2) Numerical plus key: For numerical addition on numerical setting
interface, growingrate: +1
(3) Numerical minus key: For numerical reduction on numerical
settinginterface, reduction rate:-1
(4) Program setting key: Click this key to start program setting, consist
of body fat test; time reciprocal, distance reciprocal, calories reciprocal and
heart rate monitoringfive fixedprocedures;
(5) Reset key: Touch press this button (no more than 3s) to backstep.;
Long press this key (morethan or equal to 3s)to return tothe initial interface,
all datawill bereset.
(6) Confirm key: Confirm key for data and program selection.
numerical modificationconfirmation;
